Zaɓin Kayan Kayan Mota na Motar Micro DC

Micro DC Gear Motar micro motor ce da ake amfani da ita sosai. Ana amfani dashi galibi don samfuran da ke da ƙarancin saurin gudu da fitarwa mai ƙarfi, irin su makullai masu wayo na lantarki, firintocin micro, na'urorin lantarki, da sauransu, waɗanda duk suna buƙatar micro gear DC Motors. Zaɓin kayan aikin injin ɗin micro DC shima yana da mahimmanci sosai, kuma yana buƙatar la'akari da shi daga bangarori da yawa.

Akwai nau'ikan filayen maganadisu guda biyu a cikin da'irar maganadisun baƙin ƙarfe na ƙaramar motar DC Geared: filin maganadisu akai-akai da madaidaicin filin maganadisu, don haka ana buƙatar la'akari da yanayin filin maganadisu.Babban ƙarfen ƙarfe shine ɓangaren ƙaramin injin ɗin DC wanda ke ɗaukar motsin maganadisu kuma yana gyara jujjuyawar iska. Yawancin lokaci ana yin shi da zanen gadon ƙarfe na siliki stacked. Domin baƙin ƙarfe core na'ura mai juyi aiki a akai-akai Magnetic filin, lantarki tsarki baƙin ƙarfe da No. 10 karfe za a iya cikakken amfani. Magnetic permeability.Don na'urar jujjuyawar ƙarfe na ƙarfe da ke aiki a cikin madadin filin maganadisu, ana iya amfani da zanen gadon ƙarfe na silicon da suka dace don tabbatar da ƙarfin maganadisu da ƙimar jikewa gami da buƙatun asarar ƙarfe.

YS-5436GR385.jpg

Jagoranci da daidaiton ƙarfin maganadisu na ƙarfe na ƙarfe ta ƙaramin motar DC Geared Motar sanyi mai birgima da zafin birgima na silicon karfe zanen gado an kasu kashi biyu: daidaitacce da mara dacewa. Domin isotropic da ake bukata na Magnetic filin rarraba, idan babban DC geared mota (diamita fiye da 900mm), yana bukatar a yi amfani da daidaitacce silicon karfe takardar (siliki karfe: babban abu shi ne baƙin ƙarfe da ferrosilicon gami, tare da silicon abun ciki na kusan 3% ~ 5%). Idan akai la'akari da maɗaukaki na ƙarfe na ƙarfe na ƙaramin motar DC, ana iya raba core baƙin ƙarfe zuwa nau'i biyu: babba da ƙasa. Domin baƙin ƙarfe core tare da high Magnetic yawa, silicon karfe takardar ko lantarki tsarki ƙarfe ya kamata a zaba, da kuma sanyi-birgima silicon karfe takardar ya kamata a zabi. Idan akai la'akari da tasiri na asarar baƙin ƙarfe akan tsarin tsari akan asarar micro DC geared motor, ya kamata a biya hankali ga zaɓin kauri na takardar siliki. Silica na bakin ciki takardar karfe yana da ƙarin rufi da ƙarancin ƙarfe, amma lamination yana ƙaruwa; takardar siliki mai kauri mai kauri yana da ƙarancin rufi da ƙarancin asarar ƙarfe. Asara yana ƙaruwa, amma adadin laminations kaɗan ne. Ƙimar asarar baƙin ƙarfe na ainihin kayan ƙarfe na iya zama annashuwa daidai gwargwado don ƙaramin injin DC.

 


Lokacin aikawa: Janairu-10-2023